Panasonic KX-TD816 - Page 405

5.1 Optional Programming
Optional Programming 405
Explanation
Area Bit Description Selection Default Features Guide
References
01 1 Sound source during transfer.
0
: ringback tone
1
: Music on Hold
1 • Call Transfer
• Music on Hold
2 Result of pressing the hookswitch
lightly and then placing down the
handset (during an outside call; single
line telephones only).
0
: Consultation
Hold
1
: disconnection
0 Consultation
Hold
3 Result of pressing the
FLASH
button on
proprietary telephones (during an
outside call). External Feature Access is
effective only during a call via an
analogue outside line.
0
: disconnection
signal
1
: External Feature
Access
0 • External
Feature Access
• Flash
4-7 Reserved
8 Enables or disables the dial tone
between obtaining an outside line and
dialling the phone number when using
the one-touch dial, redial or speed dial
function.
0
: disable
1
: enable
1 None
9 Result of pressing the hookswitch
lightly (single line telephones only).
0
: Consultation
Hold
1
: disconnection
0 Consultation
Hold
10 Sets the duration of the DTMF signals
sent to the VPS ports.
0
: 80 ms
1
: 160 ms
0Voice Mail
Integration for
Inband
12,11 Sets the time the system waits before
sending DTMF signals (such as a
mailbox number) to the VPS after the
VPS answers a call.
00
: 0.5 s
01
: 1.0 s
10
: 1.5 s
11
: 2.0 s
10 Voice Mail
Integration for
Inband
14,13 Sets the time the system waits before
sending DTMF signals (programmed in
[113]) to VPS after the VPS calls an
extension.
00
: 0.5 s
01
: 1.0 s
10
: 1.5 s
11
: 2.0 s
10 Voice Mail
Integration for
Inband
15 Assigns whether the system or the VPS
turns off the Message Waiting lamp
when the user hears a message recorded
in a mailbox.
0
: system
1
: VPS
0 • Message
Waiting
•Voice Mail
Integration for
Inband
16 Reserved