2.1 Manager Programming
46 General Programming
Conditions
• Messages 1 through 6 are programmed at the factory but can be changed.
• You can enter a maximum of seven "%" characters per message which can be programmed
at each user's extension. The extension user can enter
0 through 9,
and # for the %
characters. If the user enters digits less than the number of "%" characters, it is
recommended to fill the remaining "%" characters with "#" or " ".
• If there are 4-digit extension numbers available in your system, add one "%" to Message 3.
• To display parts of the message which have scrolled off the display, press or .
Features Guide References
Absent Message Capability
To Next Page
Loading...
