2.1 Manager Programming
General Programming 49
[015] Budget Management
Description
Assigns the charge limitation of a call on the extension basis.
Selection
• Jack number:
KX-TD816 –
01 through 16
(-1 / -2),
KX-TD1232 –
01 through 64
(-1 / -2),
( =all jacks, -1=first part, -2=second part)
• Charge limitation (Charge):
0 through 99999999
Default
All jacks – 0
Programming
1.
Enter
015
.
Display: 015 BUDGET MNG
2.
Press
NEXT
.
Display: Jack NO?
3.
Enter a
jack number
.
To enter jack number 01, you can also press
NEXT
.
Display example: #01-1:
0 $
4.
Enter a
charge limitation
.
To delete the charge limitation, press
CLEAR
.
5.
Press
STORE
.
6.
To programme another jack, press
NEXT
or
PREV
, or
SELECT
and the desired
jack
number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• If the charge limitation is set "0", no restriction is applied.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• To assign all jack numbers to one selection, press the key in step 3. In this case, the
display shows the contents programmed for Jack 01.
• The displayed currency can be programmed by [144] Currency Assignment.
To Next Page
Loading...
