2.2 System Programming
General Programming 57
[101] Day / Night Service Switching Mode
Description
This programme is used to determine if night mode is set automatically or manually.
Selection
Manual / Auto
(automatic)
Default
Manual
Programming
1.
Enter
101.
Display: 101 DAY/NT AUTO
2.
Press
NEXT.
Display example: D/N Mode:Manual
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE.
5.
Press
END.
Conditions
• If automatic switching is assigned, day / night mode is switched at the time programmed in
[102] Day / Night Service Starting Time.
• The operator and manager can switch the day / night mode at any time.
Features Guide References
Day / Night Service
To Next Page
Loading...
