Panasonic KX-TD816 - Day; Night Service Starting Time

2.2 System Programming
58 General Programming
[102] Day / Night Service Starting Time
Description
Sets the starting time on a day of the week basis, when automatic day / night switching is
programmed in programme [101] Day / Night Service Switching Mode.
Selection
• Day of the week selection number:
1
(Sunday) /
2
(Monday) /
3
(Tuesday) /
4
(Wednesday) /
5
(Thursday) /
6
(Friday) /
7
(Saturday) / (every day of the week)
• Hour:
1 through 12 / Disable
(no switching)
•Minute:
0 through 59
•
AM / PM
Default
Every day of the week – Day – 9:00 AM / Night – 5:00 PM
Programming
1.
Enter
102.
Display: 102 DAY/NT CLOCK
2.
Press
NEXT.
Display: Day of Week?
3.
Enter the
day of the week selection number.
To select Sunday, you can also press
NEXT.
Display example: Sun-Day: 9:00 AM
To select night mode, press
NEXT.
Display example: Sun-Nig: 5:00 PM
4.
Enter the
hour.
To set no switching, keep pressing
SELECT
until "Disable" is displayed and go to step
9.
If
SELECT
is pressed, the display shows the previous entry. If the previous setting was
"Disable", press
SELECT
to enter the starting time.
To change the current entry, press
CLEAR
and enter the new time.
5.
Press .
6.
Enter the
minute.
To change the current entry, press
CLEAR
and enter the new minutes.
7.
Press .
8.
Press
SELECT
for AM or PM.
9.
Press
STORE.