2.2 System Programming
General Programming 59
10.
To programme another day / night mode or day of the week, press
NEXT
or
PREV
, or
SELECT
and the
day of the week selection number.
11.
Repeat steps 4 through 10.
12.
Press
END.
Conditions
• To select the desired day, you may keep pressing
NEXT
in step 3. To assign every day of
the week to one selection, press the key in step 3. In this case, the display shows the
contents programmed for Sunday.
• If day / night switching is not desired, select "Disable" in step 4.
• You cannot leave the entry empty.
Features Guide References
Day / Night Service
To Next Page
Loading...
