2.2 System Programming
General Programming 63
[106] Station Hunting Type
Description
Used to enable or disable hunting and set the Station Hunting type for each extension group.
There are six Station Hunting types available:
Circular
: all of the extensions in the group are searched until an idle one is found.
Termination
: searching stops at the extension which has the largest jack number in the group.
Voice Mail (VM)
: all of the VM ports of an extension group are searched until an idle one is
found which allows Voice Mail Service.
Automated Attendant (AA)
: all of the AA ports of an extension group are searched until an
idle one is found which allows AA Service.
Ring Group
: all of the extensions in the ring group ring simultaneously.
Uniform Call Distribution (UCD)
: group members are hunted in a circular way.
Selection
• Extension group number:
1 through 8,
( = all extension groups)
•
Disable
(no hunting) /
Ter mina te
(termination) /
Circular
/
VM
(voice mail) /
AA
(automated attendant) /
RING
/
UCD
Default
All extension groups – Disable
Programming
1.
Enter
106.
Display: 106 STATION HUNT
2.
Press
NEXT.
Display: EXT GRP NO?
3.
Enter an
extension group number.
To enter extension group number 1, you can also press
NEXT.
Display example: Group1:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another extension group, press
NEXT
or
PREV,
or
SELECT
and the
desired
extension group number.
7.
Repeat steps 4 through 6.
8.
Press
END.
To Next Page
Loading...
