2.2 System Programming
General Programming 65
[107] System Password
Description
Assigns the password required for entering System Programming mode and for maintenance
from a personal computer.
Selection
Password:
4 through 7 digits
Default
1234
Programming
1.
Enter
107.
Display: 107 SYS PASSWORD
2.
Press
NEXT.
Display: Password:1234
3.
Enter a
password.
To change the current entry, press
CLEAR
and enter the new password.
4.
Press
STORE.
5.
Press
END.
Conditions
• The password can be from four to seven digits long, consisting of
0 through 9.
• If less than four digits are entered, they are not stored.
• You cannot leave the entry empty.
Features Guide References
System Programming and Diagnosis with Personal Computer
System Programming with Proprietary Telephone
To Next Page
Loading...
