2.2 System Programming
74 General Programming
Display example: RBT :1
3.
Enter a
DTMF signal number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new number.
4.
Press
STORE.
5.
To programme another selection, keep pressing
NEXT
or
PREV
until the desired selection
is displayed.
6.
Repeat steps 3 through 5.
7.
Press
END.
Conditions
• A DTMF signal number can have a maximum of three digits, consisting of
0 through 9
, ,
# and
PAUSE.
• The DTMF signals are sent to the extensions in the extension group that is assigned as
"VM" or "AA" in programme [106] Station Hunting Type.
Features Guide References
Voice Mail Integration for Inband
To Next Page
Loading...
