2.2 System Programming
General Programming 77
[115] Adjust Time
Description
Used to adjust the time for checking the normality of system data. Every day at the
programmed time, the data adjustment is performed.
Selection
• Hour:
1 through 12
• Minute:
00 through 59
•
AM / PM
Default
1:00 AM
Programming
1.
Enter
115.
Display: 115 TIME ADJ M/S
2.
Press
NEXT
to programme hour.
Display example: 1:00 AM
3.
Enter the
hour.
To change the current entry, press
CLEAR
and enter the new hour.
4.
Press to programme minute.
5.
Enter the
Minute.
To change the current entry, enter the new minute.
6.
Press to programme AM / PM.
7.
Press
SELECT
for AM or PM.
8.
Press
STORE.
9.
Press
END.
Conditions
• You cannot leave the entry empty.
• Master and slave systems are synchronised with each other.
Features Guide References
None
To Next Page
Loading...
