2.2 System Programming
82 General Programming
Conditions
• For the KX-TD1232, VM-01 through VM-12 are for the Master System and VM-13
through VM-24 are for the Slave System, if available.
• You cannot leave an entry empty.
• The first one or two digits of the voice mail extension numbers are subject to programme
[100] Flexible Numbering (01) through (16) 1st through 16th hundred extension blocks.
• The display shows "VM-XX:#YY-1:ZZZ" in step 3. "XX" means the voice mail number.
"YY" means the jack number of the voice mail port programmed in [117] Voice Mail
Number Assignment.
"-1" of YY-1 means the first part of the jack number in digital line.
YY-2 means the second number of the jack number in digital line.
• Double entry and incompatible entry for these numbers are invalid. Valid entry example: 10
and 11, 10 and 110. Invalid entry example: 10 and 106, 210 and 21.
To avoid making an invalid entry, check the other extension numbers. The default of each
extension number is as follows:
[003] Extension Number Set
KX-TD816 – 101 through 116, 201 through 216
KX-TD1232 – 101 through 164, 201 through 264
[012] ISDN Extension Number Set
Not stored.
[124] Phantom Extension Number Set
Not stored.
[813] Floating Number Assignment
KX-TD816 – 191 through 194, 196, 198, 291 through 294, 298, 299
KX-TD1232 – 191 through 194, 196 through 198, 291 through 294, 296 through 299
Features Guide References
Voice Mail Integration for Digital Proprietary Telephones
To Next Page
Loading...
