Panasonic KX-TD816 - UCD Overflow

2.2 System Programming
General Programming 87
[122] UCD Overflow
Description
Assigns the destination where the call is transferred to when all extensions in the Uniform Call
Distribution (UCD) group are busy. The Time Table number of the overflow extension must
also be assigned.
Selection
• UCD group number:
1 through 8
• Overflow extension number:
2 through 4 digits
• Time Table number:
1 through 4
Default
All UCD groups – Not stored
Programming
1.
Enter
122
.
Display: 122 UCD OVERFLOW
2.
Press
NEXT
.
Display: UCD NO?
3.
Enter a
UCD group number
.
To enter UCD group number 1, you can also press
NEXT
.
Display example: UCD1: ,TT:
4.
Enter an
overflow extension number
.
Display example: UCD1:102,TT:
5.
Press .
6.
Enter a
Time Table number
.
Display example: UCD1:102,TT:1
7.
Press
STORE
.
8.
Press
END
.
Conditions
If the overflow extension or Time Table number is not assigned, the system will not answer the
call and waits for any extension to become idle. In this case, Intercept Routing – No Answer
(IRNA) will be employed.