C
3
Features
Call Forwarding - Follow Me
Description
If you
forget to set Call Forwarding - All Calls before you leave
your
desk. this allows you to set the same function from the
destination extension.
Conditions
l
Same as the conditions of Call Forwarding - All Calls.
l
It is programmable to enable or disable this feature on Class of Service
basis.
Programming References
Feature References
Section 3, Features,
Call Forwarding - All Calls
Operation References
DPT Features, $LT Features;
-User Manual
Call Forwarding - Follow Me
Section 4, System Programming,
[005]
Flexible CO Button Assignment
[
1001 Flexible Numbering, Call forwarding / do not disturb set / cancel
[99 l] COS Additional Information. Field (2)
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User
Manual.
Flexible Button Assignment - FWD / DND Button
Call F
orwarding; - No Answer
Description
Calls to your extension are forwarded to another extension if you
do not answer the call in a pre-determined time.
Conditions
l
Types of calls which are forwarded by this function are:
CO calls - DIL 1: 1: DISA*; Intercept Routing
Intercom calls - Extension; Transfer
l
This function operates if an incoming call is not answered in a specific
period of time. Therefore, this function also applies if your extension
is busy and cannot answer the incoming call within the time.
l
There can only be one stage of Call Forwarding if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station
Hunting is activated for the forwarded call.
l
Although calls are forwarded, Message Waiting is not. The
MESSAGE button indicator is lit on the originally called extension.
l
If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
3-24
Features
*: Available for KX-TD1232 only.
To Next Page
Loading...
