Panasonic KX-TD816 - Executive Busy Override - Extension

L
Features _
l The LISZT can override the Idle / Prime Line Preference temporarily to
select a specific line. To select it. press the desired line ;rcccs4 button
(INTERCOM or CO button) before going off-hook or pressins the SP-
PHONE / MONITOR button: or if Full One-Touch Dialing is enabled.
press One-Touch Dialin,. u DSS. REDIAL. or SAVE button.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[ 1031 Automatic Access CO Line Group Assignment
[JOO] CO Line Connection Assignment
[605]-[606] Outgoing Permitted CO Line Assignment - Day / Night
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible Button Assignment - Group-CO (G-CO) Button. Loop-CO (L-
CO) Button. Single-CO (S-CO) Button
Preferred Line Assignment - Outgoing
Feature References
Section 3, Features,
CO Line Connection Assignment - Outgoing
Operation References Basic Operation,
-User Manual
Making Calls
Lockout
Description
If one party in a conversation goes on-hook, they are both
disconnected from the speech path automatically. This feature
applies to extension and CO calls. Reorder tone is sent to the
off-hook party before it is disconnected.
Conditions
In the case of a single line telephone (SLT). if nothing is dialed within a
certain period of time after the other party goes on-hook, reorder tone is
sent to the SLT and then it is disconnected from the speech path.
Programming References
No programming required.
Feature References
None
Operation References
DPT Features, SLT Features;
-User Manual
Lockout
3-82
Features