S.
3
Features
Connection References
Section 2, Installation,
2.4.6
Remote Card Installation*
Programming References
Section 4, System Programming,
[
1071
System Password
[
8 131
Floating Number Assignment
[8 141 Modem Standard*
EIA / Remote Programming & Diagnosis Manual
Feature References
Section 3, Features,
System Programming with
Proprietary Telephone
Station Message Detail
Recording (SMDR)
Operation References
Not applicable.
System Programming with Proprietary Telephone
Description
This system can be programmed with a personal computer or a
proprietary telephone (PT).
Proprietary telephones available for System Programming are:
KX-T7235; KX-T7230; KX-T7130; and KX-T7030 (Display
Proprietary Telephones).
Two extensions are allowed to-perform System Programming. The
extensions available are:
(1) An extension that is connected to jack 01.
(2) An extension that is assigned as a manager.
For more information and programming instructions, refer to
Section 4, “System Programming.”
Conditions
During System Programming the system operates normally.
During System Programming the extension is considered to be busy.
The display on the PT permits interactive programming.
Only one access is allowed to System Programming at any one time.
To access system administration, a valid password must be entered.
The password is factory-programmed and-can be changed.
A personal computer can be used to perform System Programming.
Programming References
Section
4,
System Programming
[006]
Operator / Manager Extension Assignment
[
1071 System Password
Feature References
Section 3, Features,
System Programming and Diagnosis with Personal Computer
3-l 16
Features
*: Available for KX-TD 1232 only.
To Next Page
Loading...
