Panasonic KX-TD816 - Page 241

4.1.1
Using the Proprietary Telephone.
Press SHIFT
Soft 1
soft 2
Soft 3 SHIFT
Soft 1 Soft 2
soft 3 SHIFT
Press SHIFT
You can use either the soft buttons or the overlay buttons. (For
overlay buttons; refer to “Using the Overlay” below.)
Throughout the programming you will see instructions such as
“Press PREV.” If you use the soft buttons, this means press
SHIFT, release SHIF’T and then press Soft 3. The (PREV)
function is performed.
Note
If you use the soft buttons and if programming instructions tell you to
press the following buttons, you may press soft buttons shown below.
I Instructions I
Soft button 1
SELECT
SEL+,SEL-,or SEL
CLEAR
CLR
Using the Overlay
A programming overlay is packed with the telephone at the factory.
This overlay should be used at all times while in programming
mode since the functions of the telephone keys change while in
programming mode as follows: (The original names are in
parentheses.)
. -
4-4
System Programming