Panasonic KX-TD816 - Pickup Dialing (Hot Line)

4.1.4 Example of Programming
Sample of Description
I
I
I
Explanation
001
4.2 Manager Programming i
and the desired speed dial number, the selected
I
code is displayed.
I
System Speed Dialing Number Set (contd.)
; ( 17) You can continue to program another entry.
1
; (18) After you have stored all your entries, finish this
Conditions (lg’
I
l There is a maximum of 100 speed
1
program by pressing END. After pressing END
I
dial numbers. Each speed dial
I
I
you can go to any program address you desire.
number has a maximum of 24 digits.
I
;
You can return to the Initial Message mode any
The valid characters are 0 through I
time by pressing END.
9, * and# keys, FLASH, PAUSE. i
I
To go to the next lager program address, do not
SECRET and - (hyphen) buttons. ;
press END but press Soft 1 ( SKP+ ) or
I
.
I
VOLUME V .
I
.
I
I
I
To go to the next smaller program address, do not
.
I
I
press END but press SHIFT + Soft 1 ( SKP- ) or
.
I
I
VOLUME A.
I
.
1 (19) Tells you what you should notice or consider when
Feature References’“’ Section 3, Features,
I
I
doing the programming.
Special Features for KX-T723.5
j (20) Lists all of the features related to the
-System Speed Dialing
I
I
programming. These features are described in
System Speed Dialing
I
I
Section 3.
I
!
I
Programming Structure
Program Address
Programming Group
Description
[000] - [008]
Manager Programming These programs may be accessed by the
system manager of the customer to meet
frequent changes requested by the customer.
_
[loo] - [116]
System Programming Entire system programming.
[200] - [215]
Timer Programming Flexible system timer setting.
[300] - [333]
TRS / ARS Programming Assignment of Toll Restriction and ARS.
[400] - [416]
CO Line Programming
Setting of CO line and CO line Group values.
[500] - [508]
COS Programming Setting of Class of Service (COS).
[600] - [609]
[800] - [8 141
[990] - [992]
Extension Programming Setting of extension values.
Resource Programming Assignment of customer-supplied peripherals
connected to the system.
Option Programming
Used to answer the user’s requirements or
troubles, if needed.
System Programming
4-13