43 .
System Programming
I02
Day / Night Service Starting Time
Description
Sets the starting time on a day of the week basis, when automatic
day / night switching is programmed in program [ 1011 “Day / Night
Service Switching Mode.”
Selection
Default
Every day of the week - Day - 9:00 AM / Night - 5:00 PM
Programming
1.
2.
3.
Enter 102.
Display
:
Day/Night
Time
Press NEXT.
Display
:
Day of Week?->
Enter the day of the week selection number.
To select
Sunday, you can also press
NEXT.
Display example: Sun-Day: 9:OO AM
To select night mode, press
NEXT.
Display example: Sun-Nig: 5:OO PM
Day of the week selection number:
1 (Sunday) / 2 (Monday) / 3 (Tuesday) / 4 (Wednesday) /
5 (Thursday) / 6 (Friday) / 7 (Saturday) / * (every day of
the
week)
HOW
1 through 12 / Disable
(no switching)
Minute: 0
through 59
AM/PM
4.
5.
6.
7.
Enter the
hour.
To set
no switching, keep pressing
SELECT
until “Disable” is
displayed and go to step
9.
If
SELECT
is pressed, the display shows the previous entry. If the
previous setting was “Disable,” press
SELECT to
enter the starting
time.
To change the current entry, press
CLEAR
and the new time.
Press +.
Enter the minute.
To
change the current entry, press
CLEAR
and the new minutes.
Press +.
System Program&g
4-33
To Next Page
Loading...
