109
43 0
System Programming
Expansion Unit Type
Description
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit
location.
Selection
KX-TD8 16
l
Areas 1; 2 =
Cl;El /El;Cl
(Cl: 4-CO Line Unit, El: 8-Station Line Unit)
KX-TD1232
l
Master / Slave
l
Areas
1;
2; 3 = Cl;El;E2 / Cl;E2;El/ El;E2;Cl/ El;Cl;E2 /
E2;El;Cl/ E2;Cl;El
(Cl: 4-CO Line Unit, El: 8-Station Line Unit 1, E2:
8-Station Line Unit 2)
Default
KX-TD816: Cl;El
KX-TD1232: Master and Slave - Cl;El;E2
KX-TD816
1.
Enter
109.
Display: Expansion Card
2. Press NEXT.
Display example: Cl;El
3.
Keep pressing
SELECT
until the desired selection is
displayed.
4.
Press
STORE.
5.
Press END.
Kx-TD1232
1.
i.
2
.:
-.
3.
4.
5.
Enter
109.
Display: Expansion Card
Press NEXT to program
Master System.
To program “Slave,” press NEXT again.
Display example: Master:Cl;El;E2
Keep pressing
SELECT
until the desired selection is
displayed.
Press
STORE.
If
oniy one system is in operation, go to step 8.
Press
NEXT
to program Slave System.
Display example: Slave :Cl;El;EZ-
4-40
System Programming
To Next Page
Loading...
