45 0
TRS /
ARS Programming
301-305
TRS Denied Code Entry for Levels 2 through 6
Description
These allow you to specify the numbers which are toll-restricted for
each toll restriction level as follows:
Program [301]: restricts levels 2 through 6
Program [302]: restricts levels 3 through 6
Program [303]: restricts levels 4 through 6
Program [304]: restricts levels 5 through 6
Program [305]: restricts level 6
Selection
Default
Programming
-,
c
’
1’
Conditions
l
Location number:
01 through 20
l
Toll call number:
10 digits (max.)
All locations - Not stored
1.
2.
3.
4.
5.
6.
Enter a program address (301 through 305).
Display example: TRS Deny LVL-2
Press
NEXT.
Display: Location NO?->
Enter a location number.
To
enter location number 01, you can also press NEXT.
Display example: 0l:Not Stored
Enter a toll call number.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new number.
Press
STORE.
To program another location, press
NEXT
or
PREV,
or
SELECT
and the desired location number.
7. Repeat steps 4 through 6.
8. Press
END.
l
There is a maximum of
20
toll call
numbers which can be restricted
for
each program.
Each number has a maximum of ten digits, consisting of
0
through 9,
and *
.
The character “ * ” can be used as a wild card
character.
l
Programs [306]-[3 IO] “TRS Excepted Code Entry for Levels 2 through
6” are used to assign exceptions to these numbers. Programs
[500]-[50 I] “Toll Restriction Level - Day / Night” are used to set the
toll restriction value for each COS.
Feature References
Section 3, Features,
Toll Restriction
System Programming
1-67
To Next Page
Loading...
