314-321 4.5
TRS / ARS Programming
ARS Leading Digit Entry for Plans 1 through 8
: . .
Description
By entering numbers into each leading digit plan (programs below)
you are starting the process to determine which CO line group will
be used to route the call.
Program:
[314] [315] [316] [317] [318] [319] [320] [321]
Plan:
1 2 3 4 5 6 7 8
These eight plans are used to analyze the number which the user
dials and to decide the route plan for the call. If the user-dialed
number is registered in plan 1, then Routing Plan 1 is selected for
the call. ARS Leading Digit Entry for Plans 1 through 8 match
ARS Routing Plans 1 through 8 (programs [322] through [329])
respectively.
Selection
Default
All locations - Not stored
Programming
1.
Enter a
program address (314 through 321).
Display example:
ARS Leading PL-1
Press
NEXT.
Display:
Location NO?->
Enter a
location number.
To
enter location number 01, you can also press NEXT.
Display example: 0l:Not Stored
Enter a
leading digit number.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new number.
Press
STORE.
l
Location number:
01 through 100
l
Leading digit number:
10 digits (max.)
2.
3.
4.
5.
6.
7.
8.
To program another location, press NEXT or
PREV,
or
SELECT
and the desired
location number.
Repeat steps 4 through 6.
._
Press
END.
r-
Conditions
There is a
maximum
of 100 leading digit numbers for each plan. Each
number has a maximum of ten digits, consisting of 0
through
9, and *
I
The character “ * ” can be used as a wild card character.
Feature References
Section 3, Features,
Automatic Route Selection (ARS)
4-72
System Programming
To Next Page
Loading...
