Panasonic KX-TD816 - Do Not Disturb Override

so7
47
a COS Programming
Do Not Disturb Override
Description
This program determines which Classes of Services (COS) are
allowed to perform Do Not Disturb (DND) Override.
Selection
l COS number: 1 through 8. * ( * =a11 COS)
. Disable / Enable
Default
All COS - Disable
Programming
1.
2.
3.
4.
5.
6.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
Enter 507.
Display:
DND Override
Press NEXT.
Display: COS NO?->
Enter a COS number.
To enter COS number 1. you can also press NEXT.
Display example: COS1:Disable
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
l To assign all COS to one selection, press the * key at step 3. In this
case, the display shows the contents programmed for COS I.
l Program [601] “Class of Service” is used to assign a Class of Service to
each extension.
Feature References
Section 3, Features,
Do Not Disturb (DND) Override
___.. .__ __
____. _---
4-102
System
Programming