48 a
Extension Programming
Extension Grow Assimment
Description
Assigns each extension to an extension group. Extension groups
are used for Group Call Pickup, Station Hunting, and Paging -
Group. This program is also used to assign all Voice Mail ports /
Automated Attendant ports of your Voice Processing System, if
available, to an extension group.
Selection
Default
All jacks- l/2 - Extension group 1
Programming
1.
Enter 602.
Display:
EXT Group Am
Press
NEXT.
Display: Jack NO?->
Enter a
jack number.
To enter jack number 0 1,
you
can also press
NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Conditions
l
Jack number: KX-TD816;
01 through 16, *
(-1 /
-2),
KX-TD1232;
01 through 64, * (-l/,-2),
( *
=a11 jacks, -1
= first part, -2 = second part)
l
Extension group number:
1 through 8
2.
3.
4.
5.
6.
7.
8.
Diqlay example: #Ol-1:EXGl
Enter the
extension group number.
To change the current entry, enter the new extension group number.
Press
STORE.
To pro&m another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack number.
Repeat steps 4 through 6.
Press
END.
There is a maximum
of eight extension groups. Each extension can
only belong to one group.
In the case of
KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33
through 64 are for the Slave, if available.
For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
To assign all jacks to one extension group, press the * key at step 3.
In this case. the display shows the contents programmed for Jack 0
1.
: -.
i
‘\. _ ,
i _
Feature References
Section 3, Features,
Call Pickup. Group
Extension Group
Paging - Group
Station Hunting
Voice Mail Integration
4- 106
System Programming
To Next Page
Loading...
