48
0
Extension Programming
605~606
Outgoing Permitted CO Line Assignment - Day /Night
Description
Determines the CO lines which can be accessed by an extension in
both day and night modes. The extension users can make outgoing
CO calls using the assigned CO lines.
Selection
l
Jack number: KX-TD816;
01 through 16, *
(-1
/ -2),
KX-TD1232;
01 through 64, *
(-1 /
-2),
( *
=a11 jacks, -1 = first part, -2 = second part)
l
CO line number:
KX-TD8 16;
01 through 08, * ( *
=all CO lines)
KX-TD1232;
01 through 24, * ( *
=a11 CO lines)
l
Enabl
(enable) /
Disab
(disable)
Default
All jacks-l/2 - all CO lines - Enable - Day / Night
Programming
1.
Enter a
program address (605 for day or 606 for night).
Display example: CO Out Day
2.
Press
NEXT.
Display:
Jack NO?->
3.
Enter a
jack number.
To
enter jack number 0 1, you can also press NEXT.
To
select the second part (-2), press NEXT after entering a jack
number.
Display example:
#Ol-1:COOl:Enabl
4.
Enter the desired CO
line number,
or keep pressing + or t
until the desired CO line is displayed.
To
change the current entry, enter the new number.
5.
Keep pressing
SELECT
until the desired selection is
displayed.
6.
Press
STORE.
7.
To program another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack number.
8.
Repeat steps 4 through 7.
9.
Press
END.
System Programming
4-109
To Next Page
Loading...
