48
0
Extension Programming
607408
Door-phone Ringing Assignment
- Day / Night
Description
These programs assign the extensions which will ring when a
door-phone call is received during the day and night modes.
Programmed extensions are also allowed to open the door.
Selection
Default
Programming
l
Jack number: RX-TD816;
01 through 16, *
(-1 /
-2),
KX-TD1232;
01 through 64, *
(-1 /
-2),
( *
=a11 jacks, -1 = first part. -2 = second part)
l
Door-phone number:
KX-TDS 16;
1 and 2, two entries (max.)
KX-TD 1232;
1 through 4, four entries (max.)
Jack 0 1- l- All doorphones; Other jacks - no doorphone - Day /
Night
1.
2.
3.
Enter a
program address (607 for day or 608 for night).
Display example:
Doorphone in Day
Press
NEXT.
Display:
Jack NO?->
Enter a
jack number.
To
enter jack number 0 1, you can also press NEXT.
To
select the second part (-2), press NEXT after entering a jack
number.
Display example: #Ol-1:1234
4.
Enter the
doorphone numbers.
To
assign no doorphone, press CLEAR.
To
change the current entry, press CLEAR and the new doorphone
numbers.
5.
6.
Press
STORE.
To program another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack number.
7.
Repeat steps 4 through 6.
8.
Press
END.
System Programming 4-111
To Next Page
Loading...
