Panasonic KX-TD816 - DSS Console Features

800
49
0
Resource Programming
SMDR Incoming / Outgoing Call Log Printout
Description
Used to determine which calls will produce an SMDR printout.
Selection
l Outgoing calls: All (all calls) / Toll (toll calls only) /
Off (no printing)
l Incoming calls: On (all calls) / Off (no printing)
Default
Outgoing calls - All; Incoming calls - On
Programming
1.
2.
3.
4.
5.
6.
7.
8.
Enter 800.
Display: Duration Log
Press NEXT to program outgoing calls.
Display:
Outgoing:All
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press NEXT to program incoming calls.
Display: 1ncoming:On
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press END.
Conditions
l It is necessary to connect a printer to the EIA (RS-232C) port provided
on the system.
l After connecting a printer, do not press the RETURN key, if provided
on the printer, in 10 seconds. Otherwise, the usage of the EIA port is
changed to system programming and printout will not occur.
l If “T’oll” is selected, the system will print out all the calls starting from
the numbers stored in programs [301]-[305] “TRS Denied Code Entry
for Levels 2 through 6.”
Feature References
Section 3, Features,
Station Message Detail Recording (SMDR)
,-
r
‘C
4-l 14
System Programming