Panasonic KX-TD816 - Extension Number Assignment to DSS Buttons

49 0
Resource Programming
806-807
-.
EIA (RS-232C) Parameters (contd.)
Conditions
t. ._,’
7.
Press STORE.
8.
Press NEXT to program word length.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Display example: Word Lengt:8bits
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press NEXT to program parity bit.
Display example: Parity:Mark
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press NEXT to program stop bit.
Display example: Stop Bit:lbit
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press END.
. The following combinations are invalid.
Parity
Word Length Stop Bit
Mark
8
2
Space 8
1
Space 8
2
l The program address of the out-of-service system port is unacceptable.
Feature References
Section 3, Features,
Station Message Detail Recording (SMDR)
System Programming
4-121