Panasonic KX-TD816 - One-Touch Access to System Features

813
49
0
Resource Programming
Floating Number Assignment
Description
Assigns the floating numbers for External Pagers, DISA*
messages. and the modem.
* These numbers can be used the same
way extension numbers are used for station access.
Selection
l Floating station: KX-TD816; Pager1
KX-TD 1232; Pager1 / Pager2 / Pager3 /
Pager4 / DISAl / DISA2 /
MODEM
l Floating number: 2 through 4 digits
Default
KX-TD816: Pager 1=196
KX-TD1232: Pager 1=196; Pager 2=197; Pager 3=296;
Programming
1.
2.
3.
4.
5.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
Pager 4=297; DISA 1=198; DISA 2=298;
MODEM=299
Enter 813.
Display: FLT EXT NO.
Press NEXT to program Pager 1.
3isplay example: Pagerl:EXT196
To program another floating station for KX-TD 1232, keep pressing
‘NEXT or PREV until the desired floating station is displayed.
Enter a floating number.
To change the current entry, press CLEAR and the new floating
number.
Press STORE.
To program another floating station, keep pressing NEXT or
PREV until the desired floating station is displayed.
l In the case of KX-TD816, skip steps 5 and 6.
l A floating number is composed of two through four numerical digits, 0
through 9.
l The leading one or two digits of the floating numbers are subject to
program [ 1001 Yexible Numbering, (01) through ( 16) 1st through 16th
hundred extension blocks.”
4-126
System Programming *: Available for KX-TD 1232 only.