4.10
Option Programming
990
system Additional hformation
(contd.)
Selection
l
Area code:
01
(area 1) /02 (area
2) / 03
(area
3) / M
(area
4)
l
Field number
:
1 through 22 (for areas 1 and 2)
23 through 25 (for areas 3 and 4)
l
Selection: See
“Selection”
shown above for each area.
Default
See “Default”
shown above.
Programming
1.
Enter 990.
Display:
System Add Inf.
2. Press
NEXT.
Display:
Area NO?->
3.
Enter an
area code (01 through 04).
Display example: 0010100011000001
4. Keep pressing t or + to move the cursor to the desired field.
_
5.
Enter your
selection (0 or 1).
To
change the currententqpress
STORE
and thenew selection.
6.
To program another field, repeat steps 4 and 5.
7. Press
STORE.
8.
To program another area, press
SELECT
and the desired
area code.
9.
Repeat steps 4 through 8.
10.
Press
END.
Conditions
None
Feature References
See
“References” shown above.
System Programming
4-133
To Next Page
Loading...
