610
48
l
Extension Programming
Live-
Call Screening Recording Mode Assignment *
Description
Assigns whether to close the mailbox or keep recording the
conversation after a call is intercepted.
Selection
l
Jack number:
KX-TD816 - 01 through 16, * ( *
-all
jacks)
KX-TD1232 - 01 through 64, * (*
-all jacks)
l
Stop
Ret / Keep Ret
Default
All jacks = Stop Ret (Stop recording)
Programming
1,
Enter 610.
Display: 610 LCS REC.MODE
2.
Press
NEXT.
Display
:
Jack NO?+
3.
Enter a jack number.
To enter jack number 01, you can also press
NEXT.
Display example: #Ol:Stop Ret
4. Keep pressing
SELECT
until the desired selection is
displayed.
5.
Press
STORE.
6.
To program another jack number, press
NEXT
or
PREV,
or
SELECT
and the desired jack number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
.
l
.
In case of the KX-TD 1232, jack numbers 01 through 32 are for the
Master System and 33 through
64 are
for the Slave, if available.
For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
To assign all jacks to one selection, press the * key in step 3. In this
case, the display shows the contents programmed for jack 0 1.
Feature References
Section 3, Features,
Live Call Screening (LCS)
Voice Mail Integration for Digital Proprietary Telephones
68
*:
Available
when the
Digital
Super
Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic
Voice Proceising System (one
that supports digital proprietary telephone integration; e.g. KX-TVSlOO).
To Next Page
Loading...
