Panasonic KX-TD816 - Resource Programming

49 0
Resource Programming
809
DISA Security Type*
D.escription
Assigns the security mode for CO calls attempted by the DISA
caller. There are three modes: Non Security, Trunk Security (CO
line security), and All Security. Non Security mode allows the
caller to access a CO line without dialing a DISA user code. Trunk
Security mode requires the caller to enter a DISA User Code before
making a CO call. All Security mode requires the caller to enter a
DISA user code before making both a CO call and an intercom call.
Selection
Default
Programming
Non (non security) 1 Trunk (trunk security) / All (all security)
Non
1.
2.
3.
4.
5.
Enter 809.
Display: 809 DISA SECIJRE
Press NEXT.
Display example: Security:Non
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press END.
Conditions
Program [8 111 “DISA User Codes” is used to program DISA User Codes.
Feature References
Section 3, Features,
Direct Inward System Access (DISA)
*: Available for KX-TD 1232 only.
71