811
49 0 Resource Programming
DlSA User Codes*
Description
Assigns the DISA User Codes and a Class of Service (COS) to each
code. The COS of the code determines the toll restriction level
of
the DISA caller.
Selection
l
DISA
user code number:
1 through 8
l
DISA
user code: 4
through 10 digits
l
COS
number:
1 through 8
Default
Code l-1111 -COS 1;
Code 5-5555 - COS
1;
Code
2-2222 -
COS 1;
Code
6-6666 - COS
1;
Code 3-3333 -
COS
1;
Code
7-7777 - COS
1;
Code 4-4444 -
COS 1; Code
8-8888 - COS
1
Programming
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Enter
811.
Display: 811 DISA CODES
Press
NEXT.
Display
:
User Code NO?+
Enter
a DISA
user code number.
To enter user code number
1, you can
also press NEXT.
Display example Codel:llll COS:l
Enter
a DISA
user code.
To
change the
current entry, enter the new code.
Press * to program COS.
Enter a COS
number.
To
change the current entry. enter the new
COS
number.
Press STORE.
To
program another user code, press NEXT or PREV, or
SELECT and the desired DISA
user code number.
Repeat steps 4 through 8.
Press
END.
Conditions
l
This setting is required if Trunk (CO line) Security mode is selected in
program [80!2] “DISA Security Type.”
l
There are four programmable user codes. Each code should be unique
and composed of eight numerical digits, 0
through
9.
l
You cannot leave an entry empty.
Feature References
Section 3, Features,
Direct Inward System Access (DISA)
72
*: Available for KX-TD1232 only.
To Next Page
Loading...
