Panasonic KX-TD816 - System Programming; Off-Hook Call Announcement (OHCA)

System Programming
509
Off-Hook Call Announcement (OHCA)
Description
Enables or disables to perform the Off-Hook Call Announcement
(OHCA) on a Class of Service (COS) basis.
Selection
l COS number: 1 through 8, ( * =a11 COS)
l Enable / Disable
Default
All COS - Enable
Programming
1.
Enter 509.
2.
3.
4.
5.
6.
7.
8.
Press END.
Display: 509 OHCA
Press NEXT.
Display: COS NO?+
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
Keep pressing SELECT until the desired selection is
displayed..
Press STORE.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
Repeat steps 4 through 6.
Conditions
l To assign all COS to one selection, press the
key in step 3. In this
case, the display shows the contents programmed for COS 1.
l Program [601] “Class of Service” is used to assign a Class of Service to
each extension.
Feature References
Section 3, Features
Off-hook Call Announcement (OHCA)
Whisper OHCA
11