, -\
2.4.7
Caller ID Card Installation
KX-TD1232
1.
Loosen nine screws to open the inside cover of the main unit:
Note
If any cards, units, or cords are installed to the main unit, remove
them beforehand.
2. Attach the Caller ID Card(s) to the CO Line Card, fitting the
connectors.
Up to two cards can be installed to the initial CO Line Card.
r
CO
Line Card
Inside cover
3. Put the inside cover back-on the main.unit and secure the
screws.
Installation
2-5 1
To Next Page
Loading...
