2.4.8 Doorphone and Door Opener
Connection
Connecting Door Openers
1.
Loosen the screw to remove the cover.
2.
Loosen the screws.
3. Insert the
wires coming from the door openers
into holes and tighten the screws.
I) To door
opener 2
* To door
opener
1
Notes
l
For wiring, it is recommended to use UL
1015, AWG 22 twisted wire or the
equivalent.
aTbe wire should be between 1.2 and 2.4 mm
(3164 and 3/32 inch) in diameter including
the coating.
+I=
D=1.2-2.4 IMI (3164-3132 inch)
l
Set the
door opener
paired with the
doorphone.
l
The KX-TD 1232
is illustrated as a main
unit.
._
Installation
2-55
To Next Page
Loading...
