Panasonic KX-TD816 - Page 9

9
Unplugging the Cable from the Cell Station
After assigning the Cell Station ID number to the PS, unplug the cable from the Cell Station
once.
DIP-Switch Setting
After unplugging the Cell Station once, set the DIP-Switch as follows.
1.
Switch the
Radio Signal Test Switch
from OFF to ON.
2.
Set the
Channel Number Switches
as desired.
01
01
01
01 01
01
Channel 1
1234
Channel 4
1234
Channel 7
1234
Channel 2
1234
Channel 5
1234
Channel 8
1234
Channel 3
1234
Channel 6
1234
Channel 9
1234
01
01
01 01 01 01
DIP-Switch
10 10 10 10 10 10
ON
123456
OFF
Radio Signal
Test Switch
Channel Number Switch
(Default: Channel 0)