Station Features and Operation (DPT/SLT)
100 User Manual
Canceling the absent message
Conditions
• All nine messages can be programmed either by User or System Programming.
<display PT>
• The message you select is shown on the display of your PT whenever you go off-hook.
• Regarding Message 3;
a) If the extension number you want to enter has more than the number of "%" characters,
refer to System Programming to change the setting.
b) If the extension number you want to enter has less than the number of "%" characters,
fill the remaining "%" characters with "#" or " ".
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming Guide References
[008] Absent Messages
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu
Any Telephone
Dial 7500.
Confirmation tone
and dial tone
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
7 5 0 0
<PT Display Example>
Message Cancel
To Next Page
Loading...
