Station Features and Operation (DPT/SLT)
User Manual 325
•*
2
When set by System Programming, "MNTR"will be displayed. For more details, consult
your manager or dealer.
Helpful hints
• To return to the initial display, press the MENU (S1) button or go off-hook and on-
hook.
• To go to the next/previous group number, rotate the Jog Dial or press the UP/DOWN
button instead of entering the group number. In this case, all group number " " is not
displayed.
Programming Guide References
• [991] COS Additional Information
Features Guide References
• Call Monitoring in Station Hunting
To Next Page
Loading...
