Panasonic KX-TD816 - Page 81

User Programming
User Manual 81
Programming
Conditions
• Speed dial numbers are programmed in program [001] "System Speed Dialing Number
Set."
• Each name has a maximum of 10 characters.
• For entering characters, see 2.2.8 Station Speed Dialing Number/Name Assignment [KX-
T7235/KX-T7431/KX-T7433/KX-T7436 only].
Display PT
Dial 002. Enter a speed dial number
(000 through 499).
002
speed dial no.
<To end:>
Press NEXT.
NEXT
<PT Display> <PT Display>
SPD Code?→
To enter speed dial number 000,
you can also press NEXT.
<PT Display Example>
Press END.
END
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter a name.
name
Press STORE.
STORE
Press NEXT or
PREV or SELECT.
SELECT
PREV
NEXT
Enter the desired speed
dial number
(000 through 499).
speed dial no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
000:Not Stored
002 SYS SPD NAME