Panasonic KX-TD816E - Page 344

DECT Portable Station Features 5-53
5.3 PS Programming
Setting the PS Programming Password / DECT System Lock Password
1. Search for the PS Password or DECT System Lock dis-
play. (Refer to steps 1 through 6 on page 5-52).
2. Press (Book) to select ENABLE.
3. Press (OK).
4. Enter the password (4 digits).
5. Press (OK).
6. Enter the same password again.
7. Press (OK).
8. To exit the PS Programming mode, press (Cancel).
C
OK
OK
OK
PS PASSWORD
= DISABLE
PS PASSWORD
= ENABLE
ENTER PASSWORD
=
ENTER PASSWORD
=
****
Example
REENTER PASSWORD
=
REENTER PASSWORD
=
****
Example
Example