Panasonic KX-TD816E - FWD;DND Button; Group-CO (G-CO) Button

2-18 Station Programming
2.2 Station Programming
FWD/DND Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as the FWD/DND button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button which you
wish to assign as the FWD/DND button.
2. Dial 4.
• The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible (CO) button as a Group-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the Flexible (CO) button which you wish to assign as a
G-CO button.
2. Dial #.
• The display shows:
3. Enter the CO line group number (1 through 8).
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
1
2
4
AUTO DIAL
STORE
3
CO line group number
FWD/DND
TRK GRP–
CLR
4