Panasonic KX-TDA100 - Page 412

4.7 Configuration [1]
412 Feature Guide
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Use the arrow keys to select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Feature Guide References
None
Trunk Property (for CO port)
Selects the trunk property of the port.
Default
Public
Value Range
Public: Public network
VPN: Virtual Private Network
Feature Guide References
None
Calling Party number—Numbering Plan ID—Public, Private
Selects the numbering plan ID that applies to outgoing CO line calls routed through a public and private
network.