Panasonic KX-TDA100 - Page 465

Value Range
ON or Flash, OFF
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.4.1.3 Call Pickup
1.20.3 LED Indication
DSS Key—Call Pick-up by DSS key for Direct Incoming Call
Specifies whether a DSS button will light up or flash when a call rings at the specified extension. To enable
this setting, DSS Key—DSS key mode for Incoming Call on this screen must be set to ON or Flash.
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.4.1.3 Call Pickup
DSS Key—Call Pick-up by DSS key for ICD Group Call
Specifies whether a DSS button will light up or flash when a call rings at the specified incoming call distribution
group.
To enable this setting, DSS Key—DSS key
mode for Incoming Call on this screen must be set to ON or
Flash.
Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
4.17 [2-9] System Options
PC Programming Manual 465
4.17 [2-9] System Options