Panasonic KX-TDA100 - Page 607

Feature Guide References
None
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the
moment that the extension goes on-hook for the previous call.
Value Range
Disable, Enable
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Extension Caller ID Sending
Enables the extension to send Caller ID information to an SLT.
Note that for KX-TDA30,
the setting of this parameter is only effective when a resource for sending extension
Caller ID is assigned in
Extension Caller ID Resource-1, 2 (KX-TDA30 only) for the port in 4.18 [2-10]
Extension CID Settings.
Value Range
Disable, Enable
PC Programming Manual 607
6.1 [4-1-1] Wired Extension—Extension Settings