Panasonic KX-TDA100 - Page 846

Programming Manual References
None
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
Communication—Flow
Enables the hardware flow control.
Value Range
None, Hardware
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
None
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
Value Range
1 bit, 2 bit
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
External Modem Command—Automatic Initialisation
Specifies the
command to automatically initialise an external modem when it is plugged into the Serial Interface
(RS-232C) port of the PBX.
846 PC Programming Manual
13.1 [11-1] Main