Panasonic KX-TDA100 - Page 850

Feature Guide References
1.30.5.2 Centralised Voice Mail
Remote
Remote—Analogue Remote (Modem) Floating Extension Number
Specifies the floating extension number for analogue remote maintenance. To enable this setting, an RMT
card must be installed, and Remote—Remote Programming on this screen must be enabled.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
Remote—ISDN Remote Floating Extension Number
Specifies the floating extension number for ISDN remote maintenance. To enable this setting,
Remote—
Remote Programming on this screen must be enabled.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.3.1 PC Programming
Remote—Remote Programming
Enables system programming, diagnosis, and data upload from a remote location.
Value Range
Disable, Enable
850 PC Programming Manual
13.1 [11-1] Main