Panasonic KX-TDA100 - Page 108

1.6 F
108 Feature Manual
Conditions
• The Flexible DSS button lights of the KX-T7040 and KX-T7240 can be either "Off" or "Red On". If a
button is customized as a button which shows other light patterns, these patterns will be indicated as
"Red On".
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Miscellaneous—PT Display—PT Last Display Duration in Idle Mode
2.10.5 [4-1-4] Wired Extension—Flexible Button
2.10.6 [4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
2.10.7 [4-1-5] Wired Extension—PF Button
2.10.13 [4-2-3] Portable Station—Flexible Button
2.10.17 [4-3] DSS Console—Flexible Button
PT Programming Manual
None
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified extension
with a one-touch operation.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
Live Call Screening (LCS) Used to monitor your own voice mailbox while a caller is leaving a
message and, if desired, intercept the call.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
Voice Mail (VM) Transfer Used to transfer a call to the mailbox of a specified extension.
(→ 1.19.4 Voice Mail DPT (Digital) Integration, → 1.19.5 Voice Mail
DTMF Integration)
Check-in Used to switch the status of extensions from Check-out to Check-in.
(→ 1.15.3 Room Status Control)
Check-out Used to switch the status of extensions from Check-in to Check-out.
(→ 1.15.3 Room Status Control)
CTI Used to access CTI features.
(→ 1.3.21 CTI (Computer Telephony Integration))
Primary Directory Number
(PDN)
Used to make and receive both outside and intercom calls.
(→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
Secondary Directory Number
(SDN)
Used to show the current status of another extension, call the extension,
and pick up or transfer calls to it.
(→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
*: One-touch Feature Setting Buttons: Pressing these buttons while on-hook changes the feature
settings. The new mode will be displayed for a preprogrammed time period.
Button Usage