Panasonic KX-TDA100 - Page 835

3.2 Feature Programming References
PC Programming Manual 835
– Type
– Dial (for ISDN Service)
• 2.11.17 [4-3] DSS Console
– Type
– Dial (for ISDN Service)
Feature Guide Reference
1.21.1.12 ISDN Service Access by Keypad Protocol
K
KX-T7710 One-touch Dialling
• 2.9.8 [2-6-1] Numbering Plan—Main—KX-T7710 (KX-TDA100/KX-TDA200/KX-TDA600
only)
Feature Guide Reference
1.6.1.3 KX-T7710 One-touch Dialling
L
Last Number Redial
• 2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
– Automatic Redial—Repeat Counter
– Automatic Redial—Repeat Interval
– Automatic Redial—Redial Call Ring Duration
– Automatic Redial—Analogue CO Mute / Busy Detection Timer
• 2.9.8 [2-6-1] Numbering Plan—Main—Features—Redial
• 2.9.17 [2-9] System Options—Option 2
– Redial—Automatic Redial when No Answer (ISDN)
– Redial—Save Dial After Connection to Redial Memory
– Redial—Call Log by Redial key
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Outgoing Call Log Memory
• 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 6—Outgoing Call Log
Memory
Feature Guide Reference
1.6.1.4 Last Number Redial
LED Indication
• 2.9.17 [2-9] System Options
– Option 1—PT Fwd / DND—Fwd LED
– Option 1—PT Fwd / DND—DND LED
– Option 4—DSS Key—DSS Key mode for Incoming Call
Feature Guide Reference
1.20.3 LED Indication
Line Preference—Incoming
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 4—Incoming Preferred Line