Panasonic KX-TDA100 - Page 844

3.2 Feature Programming References
844 PC Programming Manual
– Ext. No. / Floating Ext. No. (for Hurry-up)
• 2.11.17 [4-3] DSS Console
– Type
– Ext. No. / Floating Ext. No. (for Hurry-up)
Feature Guide Reference
1.2.2.4 Queuing Feature
Quick Dialling
• 2.9.9 [2-6-2] Numbering Plan—Quick Dial
Feature Guide Reference
1.6.1.6 Quick Dialling
R
Reverse Circuit
• 2.8.11 [1-1] Slot—Port Property - LCO Port—Reverse Detection
Feature Guide Reference
1.5.4.5 Reverse Circuit
Ring Tone Pattern Selection
• 2.9.14 [2-8-1] Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan 1–8
• 2.9.15 [2-8-2] Ring Tone Patterns—Call from Doorphone—Ring Tone Pattern Plan 1–8
• 2.9.16 [2-8-3] Ring Tone Patterns—Call from Others—Extension—Ring Tone Pattern Plan
1–8
• 2.9.17 [2-9] System Options—Option 1—PT Operation—PT Ring Off Setting
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
• 2.11.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Guide Reference
1.1.3.2 Ring Tone Pattern Selection
Room Status Control
• 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.11.17 [4-3] DSS Console—Type
• 2.13.2 [6-2] Hotel & Charge
– Main—Hotel Operator—Extension 1–4
– Bill—Checkout Billing—Billing for Guest (Need MEC Card)
Feature Guide Reference
1.27.2 Room Status Control
S
Software Upgrading
• 2.8.3 [1-1] Slot—Card Property - MPR—Memory Version:
Feature Guide Reference
2.3.8 Software Upgrading