Panasonic KX-TDA200 - Confirmation Tone

1.29.2 Confirmation Tone
Description
At
the
end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type
Description
Tone 1
a. Sent when the setting is accepted.
b. Sent when a call is received in voice-calling mode
(Alternate Receiving
—Ring/Voice). The caller’s voice
will be heard after the tone.
Tone 2
a. Sent from an external paging device or an extension
before being paged.
b. Sent when a call is received in Hands-free Answer-
back mode.
Tone 3-1
a. Sent before a conversation is established when using
the Paging feature.
b. Sent
when a conversation is established with the ex-
tension in the following modes after the call making
operation:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/
Voice)
c. Sent when making a call to or from a doorphone.
Tone 3-2 Sent just before a conversation is established when ac-
cessing the following features by the feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• TAFAS
Tone 4-1 Sent when moving from a two-party call to a three-party
call. (e.g.,
Executive Busy Override, Conference, Privacy
Release, Two-way Record.)
Tone 4-2 Sent when moving from a three-party call to a two-party
call. (e.g.,
Executive Busy Override, Conference, Privacy
Release, Two-way Record.)
Tone 5 Sent when a call is placed on hold (including Consultation
Hold).
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (® 3.3.1 Tones/Ring Tones).
• It is possible to eliminate each tone.
326 Feature Guide
1.29.2 Confirmation Tone